Habonim Catalog Interactive 2024 V04 03122024 - Catalog - Page 18
HABONIM BALL VALVES
Habonim Floating Ball Valve Designs
Multiport valves
Multiport valves are primarily used to simplify pipe and valve systems by replacing multiple
two-way valves with a single multiport valve. They minimize dead legs, optimize drainability,
simplify system validation and have a reduced envelope profile for easier installation. Multiport
valves allow piping and machine engineers to design a simpler system that saves space and
has fewer flow elements and leak paths. One multiport valve can replace multiple two-way
valves and automation devices, and provides safe and easy changeover and flow shutoff, all
within a confined space. Reducing the quantity of piping and fittings also means faster and
more cost-effective construction. Available in a variety of flow patterns and directions and in
both automatic and manual configurations, the design possibilities offered by the multiport
valve are virtually unlimited.
61 series
| Multiport with three horizontal ports
| Standard or full port design, forged or cast
| Vacuum 10 -6 Tor
| ASME B16.34 class 600 (wall thickness) | Size ¼"-1½" (DN8-DN40)
| ASME B16.34 class 300 | Size 2"-4" (DN50-DN100)
62 series
-
| Multiport with four horizontal ports
| Standard or full port design, forged or cast
| Vacuum 10 -6 Tor
| ASME B16.34 class 600 (wall thickness) | Size ¼"-1½" (DN8-DN40)
| ASME B16.34 class 300 | Size 2"-4" (DN50-DN100)
Diverter valves
Diverter valves are primarily used to split or combine process flows, or to switch medium among
different pieces of process equipment such as pumps, filters, or whole pipelines Diverter valves
provide reliable high flow rates in the most severe operating conditions, including vacuum
conditions. They can also handle highly viscous media without the need for constant backflushing. The diverter valves are available with different ball designs to accommodate a wide
range of flow patterns. These flexible flow combinations reduce the number of valves in a system,
thereby saving costs and facilitating easier control. Because all of the diverter valves have the
same body Face-to-Face dimensions, they can be used with all standard end connections.
18
VALVES
